Search results for "Cure monitoring"
showing 2 items of 2 documents
Simultaneous measurement of temperature and strain in glass fiber/epoxy composites by embedded fiber optic sensors: I. Cure monitoring
2007
In this paper (Part I) the use of fiber optic sensors for real-time monitoring of the cure kinetics of GFRP composites is explored. The proposed sensing system allows the simultaneous measurement of both temperature and strain by monitoring the change in reflected wavelength from two coupled fiber Bragg grating (FBG) sensors that have been embedded into the composite laminate. Instrumented GFRP laminates with 12, 18 and 24 reinforcing plies, respectively, were prepared by means of the vacuum bagging technique. Samples were cured in a thermally controlled oven at 80 degrees C and 30 kPa for 240 min (isothermal stage) and then cooled down to ambient temperature by turning off the heating sour…
Cure monitoring of catalysed cyanate ester resins
2000
The cure behaviour of two bisphenol A-based cyanate ester resins, AroCy B10 and B30, catalysed by copper acetylacetonate and nonylphenol was studied. For this purpose, differential scanning calorimetric (DSC) and rheological measurements were carried out at temperatures between 130 and 170 °C. The cyanate conversion profiles are fitted with a second-order rate law in the kinetically controlled regime where a good time–temperature superposition is attained. However, it is necessary to add an empirical kinetic term to give a good description of the entire range of curing. Simultaneously, times to gelation and vitrification have been determined by dynamic rheological measurements over the same…